|
|
Burrito .40 3D Profile
Designed by Paul Swanson
|
| Burrito kit - $69.00 + Shipping |
Out |
|
|
| Wing Span: |
44" |
| Weight: |
4 - 4.5 lbs. |
| Wing Area: |
748 Sq. In. |
| Wing Load: |
12 - 13 Oz / sq. ft. |
| Engine: |
.46 - .53 BB 2 stroke, .63 - .82 4 stroke |
| Radio Gear: |
4 - 5 Channel Radio, 5 standard servos |
|
|
| The Burrito is great for entry level to advanced 3D. It was fashioned after
the Morris Hobbies Knife. Learning 3D can be difficult and having to repair your 3D bird a chore.
Seems like everytime you get close to learning that new move, something wrong happens and you dumb-thumb it.
Well, the Burrito has you in mind! The fuse is designed with a Glass Form Epoxy Tube down the center
to keep the fuse from breaking off behind the trailing edge of the wing! NO MORE FUSE REPAIRS!
The Burrito excels in hovering, torque rolling, harriers, both upright and inverted and flat spins both ways.
If you're a first time kit builder, never fear!! The Burrito
is engineered to be very easy to build as many of the parts are precut and most of the cuts are straight.
If you're looking to get into 3D, this is the plane for you! |
|
|
Full Kit includes: CNC Router Cut wood, sticks, sheeting, glassform epoxy tube,
pre-bent wire landing gear, aircraft ply motor mount, plans and instructions. Basically everything
you'll need to finish the Airframe. |
| Scratch Builders Plans - $20 |
|
In Stock |
| 2 1/2 deg thrust plate, 3 1/4" sq. - $2.50 |
|
In Stock |
|
