|
|
Rank: Member
Groups: Member
Joined: 4/9/2008
Posts: 22
Points: 75
Location: Las Vegas NV
|
|
|
Rank: Member
Groups: Member
Joined: 4/9/2008
Posts: 22
Points: 75
Location: Las Vegas NV
|
Main spars and center rib. File Attachment(s):
 Primo 60 007.jpg (1,166kb) downloaded 55 time(s).
Primo 60 009.jpg (1,187kb) downloaded 44 time(s).
Primo 60 010.jpg (1,165kb) downloaded 42 time(s).
|
|
Rank: Member
Groups: Member
Joined: 4/9/2008
Posts: 22
Points: 75
Location: Las Vegas NV
|
Servo rails and subspars. File Attachment(s):
Primo 60 013.jpg (1,181kb) downloaded 50 time(s).
Primo 60 015.jpg (1,201kb) downloaded 45 time(s).
|
|
Rank: Member
Groups: Member
Joined: 4/9/2008
Posts: 22
Points: 75
Location: Las Vegas NV
|
Bottom sheeting and servo bays. Wing flipped and LE sheeting. File Attachment(s):
Bottom wing sheeting.jpg (1,182kb) downloaded 42 time(s).
Wing flipped.jpg (1,198kb) downloaded 25 time(s).
Top leading edge sheeting.jpg (1,186kb) downloaded 34 time(s).
|
|
Rank: Member
Groups: Member
Joined: 4/9/2008
Posts: 22
Points: 75
Location: Las Vegas NV
|
More good stuff. I like this kit so far, File Attachment(s):
Top sheeting and hatches measured.jpg (1,196kb) downloaded 26 time(s).
Wing unpinned and hatches cut.jpg (1,284kb) downloaded 24 time(s).
Hatch support, basswood on top balsa sides.jpg (1,162kb) downloaded 37 time(s).
|
|
Rank: Member
Groups: Member
Joined: 4/9/2008
Posts: 22
Points: 75
Location: Las Vegas NV
|
|
|
Rank: Member
Groups: Member
Joined: 4/9/2008
Posts: 22
Points: 75
Location: Las Vegas NV
|
Here's a few more. Tried to downsize these, hopefully they won't need downloading. Almost done with the kitting part. Tristock added to TE, spars trimmed. Leading edge shaped and sanded. Outside ribs added.
snacker attached the following image(s):
|
|
Rank: Member
Groups: Member
Joined: 4/9/2008
Posts: 22
Points: 75
Location: Las Vegas NV
|
Fuse parts laid out on plans, glue with some thin CA. Scarf in bottom fuse piece to extend. Not looking forward to covering. Plane has gone together quicker than I can stuff an arf!
snacker attached the following image(s):
|
|
Rank: Member
Groups: Member
Joined: 4/9/2008
Posts: 22
Points: 75
Location: Las Vegas NV
|
Rudder, wing and fuse done.
snacker attached the following image(s):
|
|
Rank: Member
Groups: Member
Joined: 4/9/2008
Posts: 22
Points: 75
Location: Las Vegas NV
|
Done with the sticks.
snacker attached the following image(s):
|
|
Rank: Member
Groups: Member
Joined: 4/9/2008
Posts: 22
Points: 75
Location: Las Vegas NV
|
forgot to post finished product
snacker attached the following image(s):
|
|
Rank: Administration
Groups: Administration
, Member
Joined: 4/9/2008
Posts: 178
Points: 379
Location: Bartlett
|
Looks awesome Snacker! Great work...
|
|
|
Guest |
