|
|
Rank: Administration
Groups: Administration
, Member
Joined: 4/9/2008
Posts: 178
Points: 379
Location: Bartlett
|
Thought I'd get a list together of what folks are using to power their Primo 15's. From what I've seen, looks like the sweet setup is:
Hacker A20-20L
25 amp ESC
1320 mAh 3 cell packs.
10x4.7 prop
Let me know what setup you are running.
|
|
Rank: Newbie
Groups: Member
Joined: 12/1/2010
Posts: 1
Points: 3
Location: Drumore, PA
|
Paul, new to this forum, but I've got many of your Mojos (several 40's-one in build phase), and a 60), and was looking for info on electric conversion for the 40, can you direct me on here to the info.?
Thanks much, I know this isn't the right place for asking, but not navigating well yet.
|
|
Rank: Administration
Groups: Administration
, Member
Joined: 4/9/2008
Posts: 178
Points: 379
Location: Bartlett
|
Here are some links from theProfileBrotherhood.com to Primo's that have been electrified: Electric PrimoElectric Primo 2Electric Primo 3
|
|
Rank: Newbie
Groups: Member
Joined: 2/2/2011
Posts: 1
Points: 3
Location: Reseda, CA
|
The Primo setups links above are for larger models. See a few of these: http://www.theprofilebrotherhood.com/forum/viewtopic.php?f=10&t=30003&hilit=primo+15 ST.10, Speed 400, Park 450, Hacker A20 20l, ...... http://www.rcgroups.com/forums/showthread.php?t=1227695 Torque 22T 930 You can find a few more in searches. Allen
|
|
Rank: Newbie
Groups: Member
Joined: 1/27/2012
Posts: 5
Points: 15
Location: malta
|
i whant to put a 26 fs on it and swing an 11x4 any ideas?
|
|
Rank: Administration
Groups: Administration
, Member
Joined: 4/9/2008
Posts: 178
Points: 379
Location: Bartlett
|
That might be a little heavy on the Primo 15... You could probably make it work, but don't expect much in terms of performance.
|
|
Rank: Newbie
Groups: Member
Joined: 1/27/2012
Posts: 5
Points: 15
Location: malta
|
i get 3.5 lbs plus staic thrust witha 11 x 4 and got a great response and reliability and wanted to put it on a 3d as it gots loads of torque ot should i build something bigger than a primo for it?
|
|
Rank: Administration
Groups: Administration
, Member
Joined: 4/9/2008
Posts: 178
Points: 379
Location: Bartlett
|
What does that motor weigh? It's the weight that will cause the performance to suffer. Wing loading is what you're looking for when you want to fly 3d. If you're just looking to burn holes in the sky, then go for it... But if you're wanting to do more 3d, then I'm thinking it will be better suited on the Mojo 25...
|
|
Rank: Newbie
Groups: Member
Joined: 1/27/2012
Posts: 5
Points: 15
Location: malta
|
its in at 290g or 10oz with prop as much as a 25 la or fp
|
|
Rank: Newbie
Groups: Member
Joined: 1/27/2012
Posts: 5
Points: 15
Location: malta
|
so i think its to the drawing board to build something for it hows my order going? yesterday i sent it to you for 5 kits and props
|
|
Rank: Administration
Groups: Administration
, Member
Joined: 4/9/2008
Posts: 178
Points: 379
Location: Bartlett
|
ldalmas wrote:its in at 290g or 10oz with prop as much as a 25 la or fp I think that would be a good choice....
|
|
|
Guest |
