SwanysHouse - Home of the Mojo, Burrito and Primo!

Hang low with a Mojo!
Mojo .40 size 3D Profile - NOW IN ARF FORM!
Designed by Paul Swanson
Mojo ARF custom kit - $179.00 + Shipping Out  
  *Quantity orders subject to additional shipping costs.

Wing Span: 46"
Weight: 4 - 4.5 lbs.
Wing Area: 704 Sq. In.
Wing Load: 13 Oz / sq. ft.
Engine: .46 - .53 BB
Radio Gear: 4 - 5 Channel Radio, 5 standard servos

The Mojo was designed to be a 3D monster! This bird is for intermediate to advanced pilots. Super clean knife edge with little to no roll coupling. Harriers are very stable with almost no wing rock. This bird is incredibly agile and excels in all 3d maneuvers. This plane flys aerodynamically neutral at all attitutes. The fuse design incorporates a glassform Epoxy Tube, so it's very durable! The ARF is covered in Ultrakote, so covering materials are readily available at your local hobby shop.

Now even more agile and manuverable! The Mojo ARF fuse has been extended and the tail feathers have been increase over the stock Mojo. If you want to take the next step in 3D, this bird is for you!

Mojo ARF includes: Mojo Air frame covered, glassform epoxy tube and pre-bent wire landing gear. Basically everything you'll need to build the Mojo except an engine radio gear and control linkage!
Check out the ARF manual for a pictures of the build.
Note: These ARFs do NOT look like the picture. I'm proud to say these red and white ARFs were built in the USA and the quality is awesome! The scheme is red on top and white on the bottom ready for your choice of graphics or fly it as is!
2 1/2 deg thrust plate - $2.50 Out
Primo 15 |  Primo 25 |  Primo 40 |  Primo 60 |  Mojo 25 |  Mojo 40 |  Mojo 60 |  Mojo 65 |  Burrito |  Taco
Props |  Swag